Agilent Technologies 1000B Series User Manual

3Capturing Data
96 Agilent 1000B Series Oscilloscopes User’s Guide
To specify a trigger holdoff
Trigger holdoff can be used to stabilize a waveform. The holdoff time is
the oscilloscope's waiting period before starting a new trigger. The
oscilloscope will not trigger until the holdoff time has expired.
To specify a trigger holdoff:
1 Press [Menu].
2 In the Trigger menu, press Set Up.
3 In the Set Up menu, press Holdoff and turn the entry knob to adjust
the holdoff setting.
To reset the trigger holdoff
1 In the Set Up menu, select the Holdoff Reset menu item to return the
trigger holdoff setting to the 100 ns minimum value.
Figure 38 Trigger Holdoff

Agilent Technologies 1000B Series Specifications

General

Brand	Agilent Technologies
Model	1000B Series
Category	Test Equipment
Language	English