3Capturing Data
84 Agilent 1000B Series Oscilloscopes User’s Guide
To load a recording
1 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press Load.
2 If the External location has been selected, use the Disk Manager to
select and load the waveform recording file. See “Using the Disk
Manager” on page 122.
To import/export recordings
1 Because you can only export and import waveform recordings from an
external drive, select the External location. See “To select
internal/external recording storage location” on page 83.
2 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press
Imp./Exp..
3 Use the Disk Manager to select the file and import or export the
waveform recording. See “Using the Disk Manager” on page 122.
To Next Page
Loading...
Need help?
General
