173
Instrument Automation
Clock time programming
Clock time programming
Clock time programming allows certain setpoints to change
automatically at a specified time during a 24-hour day. Thus, an event
programmed to occur at 14:35 hours will occur at 2:35 in the afternoon.
A running analysis or sequence has precedence over any clock table
events occurring during this time. Such events are not executed.
Possible clock time events include:
• Valve control
• Method and sequence loading
• Starting sequences
• Initiating blank and prep runs
• Column compensation changes
• Adjustments of the detector offset
To Next Page
Loading...
Need help?
General
