87
The Column Oven
Procedure: Setting up an isothermal run
Procedure: Setting up an isothermal run
An isothermal run is one in which the oven is maintained at a constant
temperature. To create an isothermal run, set Rate 1 to zero.
1. Press [Oven] to access the oven control table.
2. Enter the oven temperature for the isothermal run. Note that your actual
and setpoint values will probably differ from the example.
3. Enter the number of minutes (Init time) that you want the oven to stay
at this temperature. This time is the duration of the run.
4. If Rate 1 is not 0, enter zero for an isothermal run.
To Next Page
Loading...
