Agilent Technologies 6890 Series - Procedure: Storing a Method

Analytical Methods
Creating a method
182
Procedure: Storing a method
To store a method:
1. Press [Method] and scroll to the method number you wish to use.
2. Press the [Store] key. You are then asked to confirm the store.
3. [Enter] stores the method using the chosen number. [Clear] returns to the
STORED METHODS status table without storing the method.
4. If a method with this number already exists, this screen appears:
• [Enter] to replace the existing method with the new one and return to
the STORED METHODS status table.
• [Clear] to return to the STORED METHODS status table without storing
the method.