Agilent Technologies 6890 Series - Procedure: Adding Events to the Clock Table; Procedure: Editing Clock Time Events

177
Instrument Automation
Using clock time events
Procedure: Adding events to the clock table
1. Press [Clock Table].
2. To add new events to the clock table, press [Mode/Type].
When entries are added, they are automatically ordered
chronologically.
3. Select next event type.
4. Set appropriate parameters.
Repeat this process until all entries are added.
Procedure: Editing clock time events
1. Press [Clock Table] to view all events programmed.
2. Scroll to the event you want to change.
3. Edit the time for an event, move the cursor to the line labelled
Time: and type the desired time.
4. Edit a setpoint value by scrolling to the setpoint item and
pressing the [On] or [Off] key, or enter a numerical value for
the setpoint.