Agilent Technologies 6890 Series User Manual

Messages Part 2. Shutdown messages
246
Part 2. Shutdown messages
When the GC encounters a Shutdown condition, a popup message appears on
the display. The popup message is numbered and briefly explains the problem.
This chapter provides more thorough information about the problems that cause
the GC or a component of the GC to shut down.
Table 26 Shutdown Messages
Shutdown no. Popup message Comments
1 Oven shut off See page 247.
2 Oven cryo shutdown See page 247.
3 Front inlet pressure shutdown See page 248.
4 Front inlet flow shutdown See page 248.
5 Back inlet pressure shutdown See page 248.
6 Back inlet flow shutdown See page 248.
7 Front detector fuel gas shutdown See page 248.
8 Front detector air/ref shutdown See page 248.
9 Front detector makeup shutdown See page 248.
10 Back detector fuel gas shutdown See page 249.
11 Back detector air/ref shutdown See page 249.
12 Back detector makeup shutdown See page 249.
13 Pres aux 3 shutdown See page 249.
14 Pres aux 4 shutdown See page 249.
15 Pres aux 5 shutdown See page 249.
16 Multiposition valve is not switching See page 249.
17 Can’t reach setpoint of multipos valve See page 250.
18 Front inlet cryo shutdown See page 250.
19 Back inlet cryo shutdown See page 250.
20 Aux 1 cryo shutdown See page 251.
21 Aux 2 cryo shutdown See page 251.
22 Front inlet heating too slowly: temperature shut off See page 251.
23 Back inlet heating too slowly: temperature shut off See page 251.

Agilent Technologies 6890 Series Specifications

General

Brand	Agilent Technologies
Model	6890 Series
Category	Laboratory Equipment
Language	English