Agilent Technologies 6890 Series User Manual

259
Part 4. Fault messages Messages
Table 28, continued
Fault no. Status message Popup message Run log Comments
241 Invalid line sense Line sense reading
thermal shutdown
Not ready:
Thermal shutdown
242 Aux3 faulty fact cal Pneu aux module invalid
constants from factory
calibration
Not ready:
Aux3 faulty fact cal
243 Aux4 faulty fact cal Pneu aux module invalid
constants from factory
calibration
Not ready:
Aux4 faulty fact cal
244 Aux5 faulty fact cal Pneu aux module invalid
constants from factory
calibration
Not ready:
Aux5 faulty fact cal
245 F det module rev Front det module:
obsolete EEPROM
Not ready:
F det module rev
246 B det module rev Back det module: obsolete
EEPROM
Not ready:
B det module rev
247 F inlet module rev Front inlet module:
obsolete EEPROM
Not ready:
F inlet module rev
248 B inlet module rev Back inlet module:
obsolete EEPROM
Not ready:
B inlet module rev
249 Aux module rev Pres aux module: obsolete
EEPROM
Not ready:
Aux module rev
250 F det wrong module Front det: non-det module Not ready:
F det wrong module
251 B det wrong module Back det: non-det module Not ready:
B det wrong module
252 F inlet wrong module Front inlet: non-inlet
module
Not ready:
F inlet wrong module
253 B inlet wrong module Back inlet: non-inlet
module
Not ready:
B inlet wrong module
254 Aux wrong module Non-aux module in pneu
aux position
Not ready:
Aux wrong module

Agilent Technologies 6890 Series Specifications

General

Brand	Agilent Technologies
Model	6890 Series
Category	Laboratory Equipment
Language	English