Agilent Technologies Cary 8454 - Using your UV-Visible Spectroscopy System

Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide 67
Installing the UV-Visible Software 5
Agilent ChemStation Computer Details
Scheduled Processes
Some scheduled processes, like virus checking or defragmenting, may
cause instrument communication problems. Due to these problems, any
automated measurement will be aborted. To prevent problems of this kind
please disable any scheduled event.
Number Format
To avoid wrong values displayed or printed, the International settings
must include the correct number format. Set the Number Format Decimal
Separator to "." (decimal point) in Control Panel > Region and Settings.
Printer
Please make sure that a default printer is configured in your Microsoft
Windows operating system. This is done via the Control Panel application.
Mass storage 40 GB Hard-Disk and CD-ROM
Memory Minimum of 2 GB of RAM for UV-Visible
ChemStation software and a single instrument.
The minimum recommended amount of memory
for a single- bath dissolution system (G1118AA)
and kinetic measurements (G1117AA) is 3 GB of
RAM.
Add 256 MB of RAM for each additional bath in a
multi-bath dissolution system (G1118AA).
In all cases, an appropriate amount of virtual
memory should be configured.
Table 4 Minimum PC Requirements (continued)
NOTE
A maximum of four instruments may be interfaced to each Agilent ChemStation.
NOTE
If you are upgrading from a previous version of Agilent ChemStation, you must uninstall the
old version of ChemStation first.