76 Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
5 Installing the UV-Visible Software
Installing the Agilent ChemStation Using the DVD
Press Add to add the module to the list of Selected Modules.
• In case of a LAN connection, select the LAN option and press
Add. In
the upcoming dialog select Identify by Host Name or Identify by IP
Address and enter the selected information - Host Name: or IP
Address: - in the entry field. Press OK to add the module to the list
of Selected Modules.
• Click OK to complete the instrument configuration.
If you configure more than one instrument, you must ensure that each
instrument has a unique GPIB or LAN address. You can configure up to
four spectrophotometers.
3 Click OK to enter your selections and to return to the main menu.
4 If you want to change the color of a screen element:
Choose Colors from the Configuration menu, select that element under
Screen Elements, then select a color from those shown below in the
Standard Colors or Custom Colors list box. Your changes will appear in
the Screen Elements list box. You can create custom colors and add
these, use the Add Custom Colors... button and follow the instructions
available with the Help.
5 Select and configure the GPIB interface.
For GPIB communication, in the configuration dialog for the GPIB Card:
field hp82341 must be selected.
Click OK to save changes and return to the Configuration Editor
display.
6 If you want to add new instruments:
Choose Add New Instrument from the Add/Delete menu to add a new
instrument window to the Configuration Editor screen. Follow the above
procedure to configure the instrument. Choose Delete Instrument from
the Add/Delete menu to remove an instrument from the configuration.
To Next Page
Loading...
Need help?
General
