Agilent Technologies InfiniiVision 2000 X-Series User Manual

Web Interface 20
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 271
When accessing the password protected oscilloscope, the user name is the
IP address of the oscilloscope.
To reset the
password
Do one of these things to reset the password:
• Using the keys on the front panel of the oscilloscope, press [Utility] > I/O
> LAN Reset.
• Using the web browser select the Configure Network tab, select Modify
Configuration, erase the Password, and select Apply Changes.
Enter
password

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English