C315 Indoor Monitor Administraor Guide
Parameter Set-up:
•
Multicast Group: set the indoor monitor in one of the groups or disable this function.
•
Display Multicast In Homepage: if you disable it, the All Call on the left side ofthe
device screen will be hidden.
•
Multicast List: to fill in the parameters of the multicast group. Indoor monitor will
establish multicast calls to other indoor monitors which are set in the multicast
group.
•
Listen List: to fill in the parameters of listen group. Indoor monitor will receive
multicast calls if some indoor monitors call the listeninggroup.
•
Label: to show the label name on the calling interface if users establish all call.
To Next Page
Loading...
