E18 Door Phone Administrator Guide
19. Auto-provisioning
Configurations and upgrading on E18 can be done on the web interface via
one-time auto-provisioning and scheduled auto- provisioning via
configuration files, thus saving you from setting up configuration needed one
by one manually on the door phone.
19.1. Configuration Files for Auto-provisioning
Configuration files have two formats for the auto-provisioning. one is the
general configuration files used for the general provisioning and other one is
the MAC-based configuration provisioning.
The difference between the two types of configuration files is shown as
below:
General configuration provisioning: a general file is stored in a server
from which all the related devices will be able to download the same
configuration file to update parameters on the devices. For example
：
r000000000018.cfg.
MAC-based configuration provisioning: MAC-based configuration files is
used for the auto-provisioning on a specific device as distinguished by
its unique MAC number. And the configuration files named with device
MAC number will be matched automatically with the device MAC number
before being downloaded for the provisioning on the specific device.
Note:
If a server has these two types of configuration files, then IP
devices will first access the general configuration files before
accessing the MAC-based configuration files.
To Next Page
Loading...
Need help?
General
