E18 Door Phone Administrator Guide
Parameter Set-up:
UDP: select “UDP” for unreliable but very efficient transport layer
protocol. UDP is the default transport protocol.
TCP: select “TCP” for Reliable but less-efficient transport layer protocol.
TLS: select “TLS” for Secured and Reliable transport layer protocol.
DNS-SRV: select “DNS-SRV” to obtain DNS record for specifying the
location of services. And SRV not only records the server address but
also the server port. Moreover, SRV can also be used to configure the
priority and the weight of the server address.
8.3. Dial Options Configuration
E18 offers a variety of Dial options that allows you to have fast dial
experience while relieving you off memory burden due to long and complex
dial numbers.
8.3.1.Quick Dial by Number Replacement
If you want to replace the long and complex dial number with a shorter
number that can be memorized at greater ease and convenience for making
calls, you can configure the dial number replacement on the device and on
the device web interface. You can replace a multiple device dial numbers
such as IP address or SIP numbers with only one short number.
8.3.2.Quick Dial By Number Replacement on the Device
To Next Page
Loading...
Need help?
General
