Akuvox E18C User Manual

E18C Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
13
6.2.2.Time Setting on the Device Web Interface
You can configure time setting on the web interface. Path :Setting >
Time/Lang > Time.
Parameter Set-up:
 Automatic Date&Time Enabled: tick the checkbox to allow the date& time
in the device to be automatically set up and synchronized with the
default time zone and the NTP server (Network Time Protocol). if it untick
the checkbox, then you are allows to set up the time manually on the web
interface.
 Time Zone: select the specific time zone depending on where the device
is used and then press Confirm tab for the confirmation. The default time
zone is GMT+0.00.
 Preferred Server: enter the NTP server you obtained in the NTP Server
field.
Note:
 When the Automatic Date&Time toggle switch is toggled off then
parameters related to NTP server will become not editable. And
when the switch is toggled on, then time and date will be denied
editing.

Akuvox E18C Specifications

General

Brand	Akuvox
Model	E18C
Category	Intercom System
Language	English