Akuvox E18C - Security Notification Setting

E18 Door Phone Administrator Guide
73
Parameter Set-up:
 Enable: enable the HTTP command unlock function by clicking on Enable
field.
 User Name: enter the user name of the device web interface, for example
“Admin”.
 Password: enter the password for the HTTP command. For example :
“12345”.
Please refer to the following example:
http://192.168.35.127/fcgi/do?action=OpenDoor&UserName=admin&Passw
ord=12345&DoorNum=1
Note:
 DoorNum in the HTTP command above refers to the relay number
#1 to be triggered for the door access.
12.4.5. Unlock by Exit Button by the Door
When you need to open the door from inside using the exit button installed by
the door, you can configure the device’s Input to trigger the relay for the door
access. Path: Access Control > Input > Input.