E18 Door Phone Administrator Guide
Note:
This step is applicable to door access by RF card and facial
recognition credentials as they are identical in configuration.
12.1.4. Configure Private PIN Access Mode
E18 offers you two types of access modes for private PIN code access,
namely “ PIN” and “ APT#+PIN”. Path: Access Control > PIN Setting > Private
PIN
Parameter Set-up:
Authorization Mode: select access mode between “ PIN” and “APT#+PIN”.
if you select “PIN” then you are only required to enter PIN code directly
for the door access,while if you select “ APT#+PIN”, then you are required
to enter the Apartment Number first before entering your PIN code for the
door access.
12.2.Configure RF Card for Door Unlock
You can add RF card for the specific user for the door unlock on the web
interface and on the device.
12.2.1. Configure RF Card on the Web Interface