Akuvox E18C - Unlock by Exit Button by the Door

E18 Door Phone Administrator Guide
65
Parameter Set-up:
 User ID: enter user’s ID.
 Name:enter the user name ( resident’s name).
 Code: enter the user’s private PIN .
After user information and PIN code is entered, you can start configuring the
private PIN code for the door access.
Parameter Set-up:
 Relay: select the relay for the door unlock for the user.
 Floor NO: enter the resident’s floor number.
 Web relay: select the specific number of web relay action commands you
have set up on the web interface.
 Schedule: select from the created door access schedule on the right box
and move the one to be applied to the user(s)-specific PIN code door
access to the box on the right side.