Akuvox E18C User Manual

E18 Door Phone Administrator Guide
67
You can tap the RF card on the reader and click obtain to add RF card for the
user. Path: Access Control > User > RF Card
Note:
 RF card with 13.56 MHz and 125 KHz can be applicable to the door
phone for the door access.
12.2.1.1. Configure RF Card Code Format
If you want to integrate with the third party intercom system in terms of RF
card door access, you can change the RF card code format to be identical
with that applied in the third party system. Path: Access Control > Card
setting >RFID.
Note:
 Please refer to PIN code access schedule selection for the RF card
user(s)-specific door access.

Akuvox E18C Specifications

General

Brand	Akuvox
Model	E18C
Category	Intercom System
Language	English