E18 Door Phone Administrator Guide
12.2.2.2. Configure Facial Recognition on Web Interface
You can import the face data to the device on the web interface. Path: Access
Control > User > Face.
Parameter Set-up:
Status: It will show “Registered” when the picture uploaded conforms to
the format and standard otherwise it would show “ Unregistered” as the
default. However, the status will be changed back to “Unregistered” if the
picture uploaded is cleared when you press the Reset tab.
Photo(jpg/png): select the picture with jpg or png format to be uploaded
to the device and press if you want to clear the picture uploaded.
Note:
Pictures to be uploaded should be in jpg or png format.
12.3. Configure Door Access Using Configured
Files.
E18 allows you to speedily configure user(s)-specific door access in batch by
importing the configured all-in-one door access control files incorporating
user information, door access type, door access schedule etc., thus all the
door access setting can be done at one stop, saving your time and effort
from configuring the door access for users separately when users are large
To Next Page
Loading...
Need help?
General
