E18 Door Phone Administrator Guide
User Name: enter the user name obtained from SIP account
administrator.
Password: enter the password obtained from the SIP account
administrator.
Server IP: enter the SIP server address for the SIP account selected.
Server port: enter the SIP server port for communication. The SIP port is
“5060” by default.
8.2.1.2. Configure SIP Account on the Web Interface
To configure the configuration on the web interface, you go to Account >
Basic > SIP Account interface.
Parameter Set-up:
Status: check to see if the SIP account is registered or not.
Account: select the exact account (Account 1&2) to be configured .
To Next Page
Loading...
Need help?
General
