E18 Door Phone Administrator Guide
Parameter Set-up:
Trigger Electrical Level: select the trigger electrical level options between
“High” and “Low” according to the actual operation on the exit button.
Action to Execute: select the method to carry out the action among four
options: FTP, Email, HTTP, TFTP.
Http URL: enter the URL if you select the HTTP to carry out the action.
Action Delay: set up the delay time when the action is carried out. For
example, if you set the action delay time at 5 seconds., then the
corresponding actions will be carried out 5 minutes after your press the
button.
Execute Relay: set up relays to be triggered by the input.
Door Status: display the status of input signal.
12.4.6. Unlock by Reception Tab
In the device home screen, E18 provide residents and visitors a quick door
unlock by pressing the Reception tab on the bottom of the home screen.
Path:Intercom > Basic > Key Setting
To Next Page
Loading...
Need help?
General
