Akuvox E18C User Manual

E18C Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
15
6.3.2. Configure LED White Light Setting
LED White light is used to reinforce the lighting for facial recognition as well
as for the QR code access as needed in the dark environment. You can set
the white light function properly on the device web interface. Path: Device >
Light > White Light.
Parameter Set-up:
 Mode: select “Auto” or “OFF”. If you select “ Auto” then the white light will
turn on for 5 minutes for facial recognition and QR code scan. And if you
select “Off” then the white light will be turned off.
 Max White Light Value: set the white light value from 1-5, and the default
white light value is “3”. The greater value it is, the brighter the light will
be.
Note:
 IR LED light should be triggered first before the white light can be
valid in the facial recognition, however IR LED light does not need to
be triggered for the white light function in the QR code scan.

Akuvox E18C Specifications

General

Brand	Akuvox
Model	E18C
Category	Intercom System
Language	English