Akuvox E18C User Manual

E18 Door Phone Administrator Guide
98
16. Debug
16.1.System Log for Debugging
System log in the door phone can be used for debugging purpose. If you
want to export the system out to a local PC or to a remote server for
debugging , you can set up the function on the web interface. Path:
Upgrade >Diagnosis > System Log.
Parameter Set-up:
 LogLevel: select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is “3”, the higher the level is “5”,
the more complete the log is “7”.
 Export Log: click the Export tab to export temporary debug log file to a
local PC.
 Remote System Log Enabled: tick the checkbox to enable the function.
 Remote System Server: enter the remote server address to receive the
the device log. And the remote server address will be provide by Akuvox
technical support.

Akuvox E18C Specifications

General

Brand	Akuvox
Model	E18C
Category	Intercom System
Language	English