Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
control the door access using the network-based web relay on the device
and on the device web interface.
Web relay needs to be set up on the web Phone > WebRelay interface where
you are required to fill in such information as relay IP address, password, web
relay action etc before you can achieve the door access via web relay.
Parameter Set-up:
Type: select among three options “Disabled” “WebRelay” and “Both”.
Select “Webrelay” to enable the web relay. Select “Disable” to disable the
web relay. Select “Both” to enable both local relay and web relay.
IP Address: enter the we relay IP address provided by the web relay
manufacturer.
User Name: enter the User name provided by the web relay manufacturer.
Password: enter the password provided by the web relay
manufacturer.The passwords is authenticated via HTTP and you can
define the passwords using “http get” in Action.
Web Relay Action: enter the specific web relay action command provided
by the web manufacturer for different actions by the web relay. Without
To Next Page
Loading...
Need help?
General
