Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
mode is selected. The default user name is “Admin”.
IP01-IP05: enter the IP address of the third party devices when the
“WhiteList” authorization is select for the integration.
Please refer to the following description for the Authentication mode
No authentication is required for HTTP API as
it is only used for demo testing.
This mode is used by Akuvox developer only.
If this mode is selected, you are only required
to fill in the IP address of the third party
device for the authentication. The whitelist is
suitable for operation in the LAN.
If this mode is selected, you are required to fill
in the User name and the password for the
authentication.In Authorization field of HTTP
request header, use Base64 encode method to
encode of username and password.
Password encryption method, only supports
MD5. MD5( Message-Digest Algorithm)
In Authorization field of Http request header:
WWW-Authenticate:Digest
realm="HTTPAPI",qop="auth,auth-int",nonce="
xx", opaque="xx".