Parameters Set-up:
Enable Outbound: Click “Enable” and “Disable” to turn on or turn off the
outbound proxy sever.
Server IP: Enter the SIP address of the outbound proxy server.
Port: Enter the Port number for establish call session via the outbound
proxy server.
Backup Sever IP: Set up Backup Server IP for the back up outbound
proxy sever.
Port: Enter the Port number for establish call session via the backup
outbound proxy server.
5.4.2.4. Data Transmission Type Configuration
SIP message can be transmitted in three data transmission protocols: UDP
(User Datagram Protocol), TCP(Transmission Control Protocol) and TLS
(Transport Layer Security). In the meantime, you can also identify the sever
from which the data come from
To do the configuration , you can do as follows:
1. Click Account - Basic to find Transport Type.
2. Select the Transport type according to your need.
3. Click Submit tab to validate the setting and Cancel tab to cancel the
setting.
To Next Page
Loading...
Need help?
General
