1. Click Account - Basic to find SIP server1 /SIP serer 2.
2. Enter parameters required.
3. Press Submit tab to validate the setting and Cancel to cancel the setting.
Parameters Set-up:
Server IP: Enter the Server’s IP address number or its URL.
Port: Set up SIP server port for data transmission.
Registration Period: Set up SIP account registration time pan. SIP
re-registration will start automatically if the account registration fails during
the registration time span. The default registration period is 1800, ranging
from 30-65535s.
5.4.2.3. Outbound Proxy Server Configuration
An outbound proxy server is used to receive all initiating request messages
and route them to the designated SIP server in order to establish call session
via port-based data transmission.
To configure outbound Proxy server, you can do as follows:
1. Click Account - Basic - Outbound Proxy Server
2. Set up parameters properly.
3. Press Submit to validate the setting.
To Next Page
Loading...
Need help?
General
