SMTP password: To configure password of SMTP service (usually it is the
same with the password of sender’s email).
Email subject: To configure subject of email.
Email content: To configure content of email.
Email Test: To test whether email notification is available.
FTP Notification
FTP Server: To configure URL of FTP server.
FTP User Name: To configure user name of FTP server.
FTP Password: To configure password of FTP server.
FTP Test: To test whether FTP notification is available.
SIP Notification
SIP Call Number: To configure sip call number.
SIP Call Name: To configure display name of R20B.
5.8.1.2. Trigger Action by Push Button Call
To do so, you can do as follows:
1. Go to Intercom - Basic to find PushButton Action.
2. Choose a suitable action method and click Submit tab to save.
Parameters-Setup:
Action to execute: To choose which action to execute after triggering.
Http URL: To configure URL, if HTTP action is chosen. The URL includes
HTTP server IP address and any formation you want to send as suffix, like
device Mac and etc.
To Next Page
Loading...
Need help?
General
