Note:
Akuvox do not provide HTTP server.
5.8.1.3. Trigger Action by Input
To do so, you can do as follows:
1. Go to Intercom - Input to configure.
2. Enable/disable the input service and setup the action related parameters.
3. Click Submit to save.
Parameters-Setup:
Action to execute: To choose which action to execute after triggering.
Http URL: To configure URL, if HTTP action is chosen.The URL includes
HTTP server IP address and any formation you want to send as suffix, like
device Mac and etc.
Action Delay: To configure after how long to execute to send out
notifications and trigger relay.
To Next Page
Loading...
Need help?
General
