System Command Reference
334 Basic System Configuration Guide
— description description-string
—no description
— [no] mc-endpoint
— [no] bfd-enable
— boot-timer interval
— no boot-timer
— hold-on-neighbor-failure multiplier
— no hold-on-neighbor-failure
— keep-alive-interval interval
— no keep-alive-interval
— [no] passive-mode
— [no] shutdown
— system-priority value
—no system-priority
— [no] mc-lag
— hold-on-neighbor-failure multiplier
—no hold-on-neighbor-failure
— keep-alive-interval interval
—no keep-alive-interval
— lag lag-id lacp-key admin-key system-id system-id [remote-lag
remote-lag-id] system-priority system-priority source-bmac-
lsb use-lacp-key
— lag lag-id
lacp-key admin-key system-id system-id [remote-lag
remote-lag-id] system-priority system-priority source-bmac-
lsb MAC-Lsb
— lag lag-id lacp-key admin-key system-id system-id [remote-lag
remote-lag-id] system-priority system-priority
— lag lag-id [remote-lag remote-lag-id]
—no lag lag-id
— [no] shutdown
— peer-name name
—no peer-name
— [no] shutdown
— source-address ip-address
—no source-address
— [no] sync
— [no] igmp
— [no] igmp-snooping
— [no]
local-dhcp-server
— [no] mc-ring
— [no] mld-snooping
— pim-snooping [sap]
— [no] pim-snooping
— port [port-id | lag-id] [sync-tag sync-tag] [create]
—no port [port-id | lag-id]
— range encap-range sync-tag sync-tag
—no range encap-range
— [no] python
— [no] shutdown
— [no] srrp
— [no] sub-host-trk
— [no] sub-mgmt
— warm-standby
— bgp-multi-homing
To Next Page