32 Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Chapter 2 Configuring the Dynamic 2500 Data Collector
3. Apply power to the Dynamix 2500 data collector and connect the
instrument to the computer using the 1441-PEN25-US USB/Power
Splitter Cable.
The Found New Hardware Wizard dialog box appears prompts you,
“What do you want the wizard to do?”
4. Check Install the software automatically (Recommended) and click Next.
5. Wait while the new hardware installation wizard proceeds to install the
Dynamix 2500 data collector software.
To Next Page
Loading...
Need help?
General
