Rockwell Automation Publication 1441-UM001B-EN-P - September 2012 33
Configuring the Dynamic 2500 Data Collector Chapter 2
A Windows compatibility warning appears.
6. Click Continue Anyway.
The wizard completes the process.
7. Click Finish.
Dynamix 2500 data collector automatically connects to the computer.
USB drivers are now installed and the instrument is able to communicate
with your computer.
If Microsoft ActiveSync software is already installed on the computer.
ActiveSync software will automatically launch and asks to Set Up a
Partnership. Select No and click Next. ActiveSync software then displays
its Connected dialog.
See Install ActiveSync or Mobile Device Center Software on page 30
.
To Next Page
Loading...