Rockwell Automation Publication 1441-UM001B-EN-P - September 2012 41
Configuring the Dynamic 2500 Data Collector Chapter 2
Upgrading the Emonitor Software
The Dynamix 2500 data collector, firmware revisions 1.010 and 1.020, are
compatible with the Emonitor software, revision 3.4 and later. For instructions
on how to upgrade your Emonitor software, refer to one of the Emonitor
installation manual.
Figure 8 - Emonitor Installation Manuals
Publication Publication Number
Emonitor Gupta Single User Installation Manual EMONTR-IN001
Emonitor Gupta Multi User Installation Manual EMONTR-IN002
Emonitor Oracle Multi User Installation Manual EMONTR-IN003
Emonitor MSSQL Multi User Installation Manual EMONTR-IN004
To Next Page
Loading...
Need help?
General
