Chapter 6
Programming Via Configuration Bar Code Symbols
6–11
Exit
Enter
Enable UPC/EAN
Used to enable and disable UPC/EAN.
*Default is UPC/EAN enabled.
Read UPC Versus UPC/EAN
All versions (UPC A, UPC E, EAN 8, or EAN 13) may be automatically
recognized and decoded. You may restrict the code to only UPC–A
and UPC–E. EAN–13 and EAN–8 symbols will not be decoded.
*Default is
Read UPC or EAN
.
Expand UPC
UPC–E symbols may be expanded into the UPC–A format.
*Default is
UPC–E Not Expanded
.
Enter
Enable/Disable
Exit
UPC Only
or
UPC/EAN
Exit
Enter
Expanded
or
Not Expanded
To Next Page
Loading...
