Chapter 6
Programming Via Configuration Bar Code Symbols
6–20
Header
The header is a group of characters
transmitted before any bar code data.
The number of characters can vary from
0 to 10.
The default header is none (empty
buffer).
Trailer
The trailer is a group of characters
transmitted after the bar code data. The
number of characters can vary from 0 to
10.
The default trailer is Cr Lf shown on
the Configuration Display Screen as
^M^J.
Reader Address
The reader address is a unique, one
character address that you assign to the
decoder. The address can be any one of
128 ASCII characters.
The default reader address is none
(empty buffer).
Enter
Message
Characters from
Character Menu
End Of Characters
Exit
To Next Page
Loading...
