Chapter 6
Programming Via Configuration Bar Code Symbols
6–22
Speaker/LED Control
When this feature is enabled, the Configuration Display Screen will show LED control and good read
beep configuration information. Good reads will produce LED activity or a beep. Scans of the
configuration bar code symbols will produce beeps and flashes.
*Default is Speaker/LED Enabled.
Enter
Exit
Speaker/LED
Control
Good Read Beep
The good read beep sounds upon a
successful completion of a decode.
Setting the tone to zero will disable the
beep.
As shown in the scale, 1 through 12 form
a rough chromatic scale.
* Default tone is 12,
Speaker Volume
Speaker volume can be set to one of four volumes.
* Default volume is
Medium
.
0
1
2
3
4
5
6
7
8
9
10
11
12*
13
14
15
16
No Beep
516
539
580
612
648
687
724
767
812
859
914
967
1037
1827
2398
3032
Tone Frequency
Enter
Tone =
Numbers from
Number menu
Exit
To Next Page
Loading...
