Allen-Bradley SLC 500 Installation And Operation Manual

Table of Contents v
Publication 1747-6.2
Chapter 4
Mounting Modular Hardware Style Units 4–1 . . . . . . . . . . . . . . . . . . .
4-Slot Modular Chassis
4–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-Slot Modular Chassis
4–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-Slot Modular Chassis
4–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13-Slot Modular Chassis
4–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Link
Coupler (AIC) 4–5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Data
T able Access Module (DTAM, DTAM Plus, and DTAM Micro) 4–5
AIC+ Advanced Interface Converter (1761-NET -AIC) 4–6 . . . . . . . .
Chapter 5
SLC 5/01 Processor Hardware Features 5–2 . . . . . . . . . . . . . . . . . . .
SLC 5/02 Processor Hardware Features
5–4 . . . . . . . . . . . . . . . . . . .
SLC 5/03 Processor Hardware Features
5–6 . . . . . . . . . . . . . . . . . . .
SLC 5/04 Processor Hardware Features
5–9 . . . . . . . . . . . . . . . . . . .
SLC 5/05 Processor Hardware Features
5–12 . . . . . . . . . . . . . . . . . . .
Keyswitch
for the SLC 5/03, SLC 5/04, and SLC 5/05 Processors 5–15 .
RUN
Position 5–15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROG
Position 5–15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REM
Position 5–16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 6
Installing Your Processor 6–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Modules
6–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Your Memory Module
6–3 . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing the Memory Module
6–4 . . . . . . . . . . . . . . . . . . . . . . . .
SLC
5/03, SLC 5/04, and SLC 5/05 Operating System
Memory Module 6–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Communicating
via DF1 Full-Duplex to an
SLC 5/04 Processor with DF1 to DH+ Passthru Enabled 6–5 .
Downloading
firmware to the
SLC 5/03, SLC 5/04, and SLC 5/05 Processors 6–5 . . . . . . . .
Component Placement
6–7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Y
our Power Supply 6–8 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Y
our Chassis Interconnect Cable 6–10 . . . . . . . . . . . . . . . . . .
Chapter 7
Defining Sinking and Sourcing 7–1 . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact Output Circuits — AC or DC
7–2 . . . . . . . . . . . . . . . . . . . .
Solid-State DC I/O Circuits
7–2 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sourcing
Device with Sinking Input Module Circuit 7–2 . . . . . . . . . .
Sinking
Device with Sourcing Input Module Circuit 7–3 . . . . . . . . . .
Sinking
Device with Sourcing Output Module Circuit 7–3 . . . . . . . . .
Sourcing
Device with Sinking Output Module Circuit 7–3 . . . . . . . . .
Preparing Y
our Wiring Layout 7–4 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting Your SLC 500
Control System
Identifying the Components
of Your Processor
Installing Your Hardware
Components
Wiring Your I/O Modules

Allen-Bradley SLC 500 Specifications

General

Programming Software	RSLogix 500
Communication Ports	RS-232, DH-485, DH+
Power Supply	120/240V AC or 24V DC
Programming Languages	Ladder Logic
Operating Temperature	0°C to 60°C (32°F to 140°F)
Relative Humidity	5% to 95% (non-condensing)
Memory	4K to 64K words (depending on the processor)