Rockwell Automation Publication 1560F-UM001A-EN-P - June 2019 119
Programming Chapter 4
X.16 Phase Shift A -12.50…12.50 0.00 R Degree
X.17 Phase Shift B
X.18 Phase Shift C
X.19 Parameter Mgmt Ready
Factory Default
Ready R/W NA
(1) "X" indicates the port number (07, 08, or 09) the 150-SM6 is connected to the SMC-50 control module. This port number is displayed
on the HIM screen below the AB brand logo.
(2) Configure Turns Ratio to the value of the Ground Fault sensor CT Turns Ratio (for example, 825-CBCT=100:1 Set X.5 to 100.
(3) The sensing range of the module.
(4) Inhibit Time lets you inhibit (disable) ground fault protection for the time selected during starting.
Table 25 - 150-SM2 Parameters (Continued)
Parameter Min/Max Values Default Value Access Units
Number
(1)
Name
To Next Page
Loading...
