Allied Telesis AT-9724TS User Manual

Parameter Description
User Name Enter an alphanumeric string of up to 32 characters.This is used to identify the SNMP user.
Group Name This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version V1 – Specifies that SNMP version 1 will be used.
V2 – Specifies that SNMP version 2 will be used.
V3 – Specifies that SNMP version 3 will be used.
Auth-Protocol MD5 – Specifies that the HMAC-MD5-96 authentication level will be used.This field is only operable when V3 is
selected in the
SNMP Version field and the Encryption field has been checked.This field will require the
user to enter a password.
SHA – Specifies that the HMAC-SHA authentication protocol will be used.This field is only operable when V3 is
selected in the
SNMP Version field and the Encryption field has been checked.This field will require the
user to enter a password.
Priv-Protocol None – Specifies that no authorization protocol is in use.
DES – Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard.This field is
only operable when V3 is selected in the
SNMP Version field and the Encryption field has been checked.
This field will require the user to enter a password between 8 and 16 alphanumeric characters.
Encrypted Checking the corresponding box will enable encryption for SNMP V3 and is only operable in SNMP V3 mode.
To implement changes made, click
Apply.To return to the SNMP User Table, click the Show All SNMP User Table Entries link.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a remote SNMP manager.To view the
SNMP View Table, open the SNMP Manager folder and click the SNMP View Table entry.The following screen should appear:
Figur
e 8- 4.
SNMP
View Table
T
o delete an existing
SNMP V
ie
w T
a
b
le
entr
y
,
click the
8 in the Delete column cor
r
esponding to the entr
y y
ou wish to delete
.
To create a new entry, click
the
Add button and a separate men
u will a
ppear
.
151
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g