Configure Authenticator
To configure the 802.1X Authenticator Settings, click PAE Access Entity > Configure Authenticator:
Figure 6- 75. 802.1X Authenticator Settings window
To view the 802.1X Authenticator settings on a different switch in the switch stack, use the
Unit pull-down menu to select that switch by its ID number in the
switch stack.To configure the settings by port, click on the hyperlinked port number under the
Port heading, which will display the following table to configure:
Figure 6- 76. 802.1X Authenticator Settings – Modify
86
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
To Next Page
Loading...
