Allied Telesis AT-TQ5403 User Guide

Monitoring
22
Status
When you choose the Monitoring > Status menu selection, you can check
the status of the system parameters of the access point, the wired LANs
(LAN1 and LAN2), and the wireless interfaces (Radio1, Radio2 and
Radio3).
System Status The Monitoring > Status > System window gives the overall system status
of the access point. Refer to Figure 5.
Figure 5. Monitoring > Status > System Window
The fields are defined in Table 1 for the Monitoring > Status > System
window .
Table 1. Monitoring > Status > System Window
Item Name Description
Model The product name is displayed.
Firmware Version Displays the current version of firmware.
Firmware Build Date The date and time when the firmware was built is
displayed.
System Time Displays the information configured in the Setting
> System > Time window for the information
acquired from the NTP server.
Uptime Displays the elapsed time since activation.
Free Memory The remaining memory number is displayed.
MAC Address MAC Address is displayed.

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English