Allied Telesis AT-TQ5403 User Guide

Settings
46
In the Settings > System > SNMP > Trap Settings window, you can define
the trap settings. Refer to Figure 19.
Figure 19. Settings > System > SNMP > Trap Settings
The fields are defined in Table 17 for the Settings > System > SNMP >
Trap Settings window.
If you update or change any of these parameters, click the SAVE &
APPLY button to save and update your configuration.
Table 17. Settings > System > SNMP > Trap Settings
Item Name Description
Community
Name for
Traps
Set the community name to send a trap with 1 to 256 characters.
The default is blank.
You can use half-width alphanumeric symbols other than the
following six types.
"" (Double quote), '' (single quote), '¥' or '/' (Yen sign or backslash),
'&', '<', '>'
Trap Types
Select radio button for the trap type you want to generate:
Cold Start When the SNMP agent starts up
Link When the radio interface is up or down
Authentication When SNMP authentication fails
Trap Host IP
Address /
Hostname
Specify the host name (FQDN) or IP address of the host. Up to three
hosts can be registered. The default is blank.
(Example) manager.your.domain.com, 10.10.1.37

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English