AT-TQ5403 Access Point User’s Guide
51
LAN
In the Settings > LAN window, you can configure the Management VLAN
and Link Aggregation. Refer to Figure 24.
Figure 24. Settings > LAN Window
VLAN
Configuration
The fields are defined in Table 22 for the Settings > LAN > VLAN
Configuration window.
Table 22. Settings > LAN > VLAN Configuration Window
Item Name Description
Management
VLAN Tag
Decide the handling method of management VLAN.
When "Enabled", the management VLAN ID
becomes the specified VLAN ID.
NOTE: When the Management VLAN Tag is
"Enabled" and the Management VLAN ID is
set to "1", the AP discards any received packets
with no VLAN tag.
NOTE: When the Management VLAN ID is
"Enabled" and set to another value other than "1",
the AP handles wireless client communication
packets as if they have no VLAN tags under the
following conditions:
• Connecting to a VAP with the VAP VLAN ID set
to "1" (refer to VAP on Page 69.)
• When VLAN ID 1 is allocated by dynamic VLAN.
If "Disabled", the management VLAN ID is 1.
Untagged packets are treated as if its
VLAN ID tag is 1.
The factory default is "Disabled".
To Next Page
Loading...
Need help?
General
