Allied Telesis AT-TQ5403 User Guide

AT-TQ5403 Access Point User’s Guide
31
Neighbor AP
You can check the wireless access points that are within range of this
product.
Note
To enable this function, set "Neighbor AP Detection" to "Enabled" on
Setting > Radio > Radio1, 2, or 3 > Advanced Settings window on
page 56, page 61, or page 66.
Refer to Figure 11, “Monitoring > Neighbor AP”.
Figure 11. Monitoring > Neighbor AP
The fields are defined in Table 7 and Table 8 for the Monitoring > Neighbor
AP window.
Table 7. Monitoring > Neighbor AP Refresh Button
Item Name Description
Refresh Button Update list to the latest Neighbor AP.
Table 8. Monitoring > Neighbor AP
Item Name Description
MAC Address The MAC address of the detected wireless AP is
displayed.
Detected Channel The detected radio channel is displayed.
SSID The network name (SSID) of the detected
wireless access point is displayed.

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English