Settings
40
If you update or change any of these parameters, click the SAVE &
APPLY button to save and update your configuration.
Select Time Using Network Time Protocol (NTP)
When "Using Network Time Protocol (NTP)" is selected in the “Set System
Time" field of the Settings > System > Time window, refer to Figure 16.
Figure 16. Settings > System > Time - “NTP” Selection
The fields are defined in Table 14 with the Set System Time set to “NTP”.
System Date Manual selection for the System Time of the
Month, Day and Year.
System Time Manual selection for the System Time of the
Hour and Minute.
Table 14. Settings > System > Time - “NTP” Selection
Item Name Description
Set System Time Select "Network time protocol (NTP)" to
synchronize the date and time of this product
with the NTP server. It is possible to
minimize the deviation from the correct date
and time, and keep the date and time of
multiple products almost the same.
The factory default is "Manually".
Timezone UTC hours away from Greenwich Mean
Time
Table 13. Settings > System > Time - “Manually” Selection (Continued)
Item Name Description
To Next Page
Loading...
Need help?
General
