Settings
78
Fast Roaming - IEEE 802.11k
The IEEE 802.11k field is defined in Table 35 for Settings > VAP/Security
> Fast Roaming window.
If you update or change any of these parameters, click the SAVE &
APPLY button to save and update your configuration.
Table 34. Settings > VAP/Security > Fast Roaming Window - IEEE802.11r
Item Name Description
Fast Transition When "Enabled" is displayed, fast roaming with IEEE 802.11r
is in effect.
When "Disabled" is displayed fast roaming is turned off.
The factory default is "Disabled".
Distributing System When "Enabled" is displayed, the distributed system is in
effect.
When "Disabled" is displayed, the distributed system is not in
use.
The factory default is "Disabled".
Mobility Domain Specifies the domain of the wireless AP that performs fast
roaming with four characters hexadecimal (0 to 9, a to f,
A to F). Capital letters and lower case letters are not
distinguished.
The factory default is "a1b2".
PMK-R0 Lifetime Specifies the lifetime of PMK - R 0 with a value (unit: minute)
of 1 to 65535. The factory default is "10000".
AES Key Specifies AES Key authentication key as 32 characters of
hexadecimal number (0 to 9, a to f, A to F). Capital letters and
lower case letters are not distinguished.
The factory default is blank.
Table 35. Settings > VAP/Security > Fast Roaming Window - IEEE
802.11k
Item Name Description
802.11k RRM Select "Enabled" when using IEEE 802.11k Radio
Resource Measurement (RRM).
Select "Disabled" when not using RRM.
The factory default is "Disabled".
To Next Page
Loading...
Need help?
General
