Allied Telesis AT-TQ5403 User Guide

AT-TQ5403 Access Point User’s Guide
47
Note
FQDN is a concatenation of labels (character strings) with periods.
Half-width alphanumeric characters and hyphens can be used for
each label. The first digit is allowed. A hyphen can not be used at the
beginning or the end of each label. The number of characters for
each label is 63 characters or less.
The total number of characters of the FQDN, including the period, is
253 characters or less.
Log The AT-TQ5403 system log is configured in the Settings > System > Log
window for the level of reported problem severity and for the transfer for
log information to a server. Refer to Figure 20.
Note
You can view the log by selecting the Monitoring > Log window in
the Management Menu Area. Refer to “Log” on page 30.
Figure 20. Settings > System > Log Window
The fields are defined in Table 18 for the Settings > System > Log window.

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English