Settings
80
QoS
Set the transmission priority for each queue for the four types of data
wireless traffic. Refer to Figure 36.
Normally you do not need to change these parameters.
Figure 36. Settings > QoS Window
Basic Settings
Section
The fields are defined in Table 37 for the Settings > QoS - Basic Settings
window.
Table 37. Settings > QoS - Basic Settings Window
Item Name Description
WiFi Multimedia
(WMM)
Configure whether to enable Wi-Fi multimedia (WMM).
When "Enabled" is selected, "Wireless client EDCA
parameter" is used for communication addressed to this
product from the wireless client. If it is set to "Disabled",
WMM information will not be included in the beacon of this
product, and the wireless client will no longer use WMM.
The factory default is "Enabled".
NOTE: In order to use IEEE 802.11n and IEEE 802.11ac, this
setting must be "Enabled".
To Next Page
Loading...
Need help?
General
