AT-TQ5403 Access Point User’s Guide
49
LED In the Settings > System > LED window, you can set the ECO Mode by
selecting Enable to inactivate the front panel LEDs) or Disable to activate
the front panel LEDs. Refer to Figure 21.
Figure 21. Settings > System > LED Window
The fields are defined in Table 19 for the Settings > System > LED window.
If you update or change any of these parameters, click the SAVE &
APPLY button to save and update your configuration.
LLDP In the Settings > System > LLDP window, you can Enable or Disable the
PoE Negotiation. Refer to Figure 22.
Figure 22. Settings > System > LLDP Window
The fields are defined in Table 20 for the Settings > System > LLDP
window.
Table 19. Settings > System > LED Window
Item Name Description
ECO Mode From the pull-down menu, select "Disabled" to light the LEDs on the
front of this product and select "Enabled" to not light the LEDs.
The factory default is "Disabled".
To Next Page
Loading...
Need help?
General
